We’ve made it easy to install your acrylic print with the complimentary hanging kit that includes screws for secure and stable mounting. Follow these steps for a smooth installation process!
Step-by-Step Instructions:
Step 1: Measure and Mark the Wall
- Choose the Placement: Decide where you want to hang your acrylic print.
- Mark the Spots: Measure and mark the wall where each corner of the print will align. The center of each hole should be positioned 1.4 cm from the edges of the print to ensure balance.
Step 2: Drill Holes
- Drill the Marked Spots: Using a drill, create holes in the wall at the marked points.
- Hole Diameter: The holes should be 0.8 cm in diameter to fit the provided screws.
Step 3: Insert the Screws
- Insert the Screws: Place the screws into the drilled holes, ensuring they are aligned with the pre-drilled holes in the acrylic print.
- Leave Screw Heads Slightly Protruding: Allow the screw heads to protrude slightly from the wall (with a head diameter of 1.5 cm) so the print can hang securely on them.
Step 4: Hang the Acrylic Print
- Align the Holes: Position the acrylic print so the pre-drilled holes on each corner align with the screws in the wall.
- Secure the Print: Carefully hang the print, ensuring it’s balanced and stable.
Additional Tips:
- Screws for Each Corner: The hanging kit includes screws for all four corners, providing maximum stability for your print.
- Double-Check Alignment: Ensure that your measurements are accurate and level before drilling.